3 L4-2.5L (2010)
3. Using a jumper wire, short fuel pump relay terminals C and D in the relay and fuse block.
4. Connect the negative battery cable and operate the fuel pump.
5. Verify that there is no fuel leakage from the pressurized parts.
Standard
-
There shall be no leakage after 5 min.
6. In the case of fuel leakage, replace the following components and then do the recheck by the fuel leakage checking procedure.
-
If there is leakage, replace the fuel hoses and clips.
-
If there is damage on the seal on the fuel pipe side, replace the fuel pipe.