3 L4-2.5L (2010)
Vehicle Speed Sensor: Service and Repair
VEHICLE SPEED SENSOR (VSS) REMOVAL/INSTALLATION [FS5A-EL]
CAUTION:
-
If foreign materials are stuck to the sensor, disturbance by magnetic flux can cause sensor output to be abnormal and thereby negatively affect
control. Make sure that foreign materials such as iron filings are not stuck to the sensor during installation.
1. Perform the following procedures.
a. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
b. Disconnect the negative battery cable.
c. Remove the insulator from the transaxle.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
