3 L4-2.5L (2010)
Accelerator Pedal Position Sensor: Testing and Inspection
ACCELERATOR PEDAL POSITION (APP) SENSOR INSPECTION [LF, L5]
1. Connect the M-MDS to the DLC-2.
2. Switch the ignition to ON.
3. Verify that the APP sensor output voltage (PID: APP1, APP2) increases according to the increase in the accelerator opening angle when the
accelerator opening angle is gradually increased.
-
If verified, go to the next step.
-
If not as verified, replace the accelerator pedal. See: Accelerator Pedal/Service and Repair
4. Verify that the APP sensor output voltage (PID: APP1, APP2) is within the specification when the accelerator pedal is depressed and not
depressed.
-
If not as specified, replace the accelerator pedal. See: Accelerator Pedal/Service and Repair