3 L4-2.5L (2010)
-
TCM terminals
AD (+)-body GND (-)
-
Oscilloscope setting
5 V/DIV (Y), 1 ms/DIV (X), DC range
-
Test Condition
The following conditions are met:
-
Ignition switch ON (engine off)
-
P position
-
Accelerator pedal fully depressed
Pressure control solenoid A (-)
-
TCM terminals
AE (+)-body GND (-)
-
Oscilloscope setting
200 mV/DIV (Y), 1 ms/DIV (X), DC range
-
Test Condition
The following conditions are met:
-
Ignition switch ON (engine off)
-
P position
-
Accelerator pedal fully depressed
Input/turbine speed sensor
-
TCM terminals
AB (+)-Y (-)
-
Oscilloscope setting
1 V/DIV (Y), 2 ms/DIV (X), DC range
-
Test Condition
Idle at P position after warm-up
Intermediate sensor