3 L4-2.5L (2010)
Seat Occupant Classification Module - Air Bag: Service and Repair
SEAT WEIGHT SENSOR CONTROL MODULE REMOVAL/INSTALLATION
CAUTION:
-
When the seat weight sensor control module is replaced with a new one, perform the seat weight sensor calibration using the M-MDS. See:
Restraint Systems/Air Bag Systems/Seat Occupant Sensor/Adjustments
1. Switch the ignition to off.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the connector.
4. Remove the screws.
5. Remove the seat weight sensor control module.
6. Install in the reverse order of removal.