3 L4-2.5L (2010)
Wiper Control Module: Service and Repair
Auto Light/Wiper Control Module Removal/Installation [Wiper/Washer System]
AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION
NOTE:
-
Auto wiper system are integrated with the auto light/wiper control module.
1. Disconnect the negative battery cable.
2. Remove the glove compartment. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Dashboard Under Cover Removal/Installation
3. Remove the auto light/wiper control module. See: Relays and Modules - Lighting and Horns/Headlamp Control Module/Service and Repair/Auto
Light/Wiper Control Module Removal/Installation
4. Install in the reverse order of removal.