3 L4-2.5L (2010)
9. Remove the bolt B.
10. Remove the front seat belt.
11. Using a flathead screwdriver, lift the locking device carefully, however do not remove it.
12. Disconnect the pre-tensioner seat belt connector.
13. Disconnect the lap pre-tensioner seat belt connector.
14. Install in the reverse order of removal.
15. Switch the ignition to ON.
16. Verify that the air bag system warning light illuminates for approx. 6 s and goes out.
-
If the air bag system warning light dose not operate, refer to the on-board diagnostic system (air bag system) and perform inspection of the
system. See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Flowchart
