3 L4-2.5L (2010)
Steering Angle Sensor: Service and Repair
STEERING ANGLE SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Driver-side air bag module See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver-Side Air
Bag Module Removal/Installation
b. Steering wheel See: Steering Column/Service and Repair/Steering Wheel And Column Removal/Installation - Without Advanced Keyless
Entry And Push Button Start System See: Steering Column/Service and Repair/Steering Wheel And Column Removal/Installation - With
Advanced Keyless Entry And Push Button Start System
c. Clock spring See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair
3. Remove the steering angle sensor.
4. Install in the reverse order of removal.