3 L4-2.5L (2010)
Steering Column Cover: Service and Repair
COLUMN COVER REMOVAL/INSTALLATION
1. Pull down the steering wheel.
2. Pull the upper column cover in the direction of the arrow in the order of (1) and (2), then remove the upper column cover while detaching the
hooks and pins.
3. Pull up the steering wheel.
4. Remove the ignition key illumination. (See See: Lighting and Horns/Key Cylinder Lamp/Service and Repair)
5. Remove the screws.
6. Remove the lower column cover in the direction of the arrow (4) while keeping it open in the direction of the arrow (3) shown in the figure.
