mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Removal and Replacement|Page 3567 > < Removal and Replacement|Page 3565
Page 8
background image

e. Clean the transaxle exterior throughout with a steam cleaner or cleaning solvents.

f.

Drain the ATF.  See: Service and Repair/Procedures

g. Remove the oil cover.  See: Control Valve Body Removal/Installation - FS5A-EL

h. Remove the secondary control valve body.  See: Control Valve Body Removal/Installation - FS5A-EL

2. Remove in the order indicated in the table.

3. Install in the reverse order of removal.

4. Add ATF.  See: Service and Repair/Procedures

5. Perform the "Mechanical System Test".  See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Mechanical System Test [FS5A-EL]

6. Perform the "Road Test".  See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Road Test

[FS5A-EL]

Removal and Replacement|Page 3567 > < Removal and Replacement|Page 3565