3 L4-2.5L (2010)
13. Connect the filament connector.
14. Install the following parts:
a. Rear wiper arm and blade See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Rear Wiper Arm And Blade Removal/Installation
b. Rear spoiler See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair
c. Liftgate lower trim
d. Liftgate side trim
e. High-mount brake light See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Removal and Replacement
f.
Liftgate upper trim (See .)
15. Allow the sealant to harden completely. Sealant hardening time: 24 h