mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Body - front Door Window Won't Open Completely|Page 9271 > < Body - front Door Window Won't Open Completely|Page 9269
Page 1
background image

Front Door Window Regulator: By Symptom

Technical Service Bulletin # 0905709

Date: 091007

Body - front Door Window Won't Open Completely

Bulletin No: 09-057/09

Last Issued: 10/07/2009

Subject:
UNABLE TO FULLY OPEN FRONT WINDOW

APPLICABLE MODEL(S)/VINS
2010 Mazda3 vehicles with 
VINs lower than JM1 BL **** ** 163897 (produced before May 31, 2009)

DESCRIPTION

On some vehicles, the edge of of the front door glass is sticking out of the beltline molding and the window glass cannot be fully lowered. Excessive
clearance between the glass and the glass holder causes the glass to dislocate forward and prevents the window from fully opening.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Adjust the alignment of the troubled front door glass. Refer to MS3 online instructions or Workshop manual section 09-12 FRONT DOOR GLASS
REMOVAL/INSTALLATION.

Body - front Door Window Won't Open Completely|Page 9271 > < Body - front Door Window Won't Open Completely|Page 9269