3 L4-2.5L (2010)
Front Door Window Regulator: Service and Repair
FRONT POWER WINDOW REGULATOR REMOVAL/INSTALLATION
1. To access the glass installation bolt, position the front door glass so that the distance from the top of the front door glass to the upper part of the
front beltline molding is approx. 80 mm {3.1 in}.
2. Disconnect the negative battery cable.
3. Remove the following parts:
a. Inner garnish See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Inner Garnish Removal/Installation
b. Front door trim See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim Removal/Installation
c. Front door speaker See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Front Door
Speaker Removal/Installation
d. Front door glass See: Window Glass/Front Door Window Glass/Service and Repair
e. Front power window motor See: Power Window Motor/Front Door Window Motor/Service and Repair
4. Remove the nuts.
5. Install in the reverse order of removal.
CAUTION:
-
When installing, do not allow the cable to come out from the drum housing.