mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

CB Radios - Cautions to Observe When Installing|Page 3313 > < Keyless Entry Module|Locations
Page 1
background image

Citizens Band Radio (CB): Technical Service Bulletins
CB Radios - Cautions to Observe When Installing

Category 15
Applicable Model/s ALL MODELS
Subject INSTALLATION OF 2-WAY (CB) RADIOS
Bulletin No. 025/86
Issued

4/8/86

Revised

CB-Radio Installation

DESCRIPTION

If a two-way (CB) radio system is installed improperly or if the wrong type of unit is used, the EGI system or other vehicle systems may be affected. This
is because electronic control units can sometimes be affected by interference from such CB units. To prevent such problems, observe the following
cautions when installing a CB radio in Mazda vehicles.

1.. Keep the antenna feeder as far as possible from the control units and harnesses (at least 30 cm or 11.8 in.).

^

Never fasten the antenna feeder to the control unit harnesses.

Control Units Locations

2.

Install the antenna at the farthest point from the control units.

CB Radios - Cautions to Observe When Installing|Page 3313 > < Keyless Entry Module|Locations