323 L4-1600 1597cc (1986)
1.
Loosen front lateral link inner attaching nut, then retorque nut to 52-63 ft.lbs.
2.
Adjust toe-in by turning spacer, Fig. 4.
3.
After adjustment is completed, torque attaching nut to 69-86 ft.lbs.
1987-88 323 Station Wagon & 1988 323 W/All Wheel Drive & 626 & MX-6 W/2 Wheel Steering
1.
Loosen adjusting rod locknuts.
2.
To increase toe in, turn right rod counterclockwise and left rod clockwise same amount.
3.
To decrease toe in, turn right rod clockwise and left rod counterclockwise an equal amount.
4.
Torque adjusting nuts to 41-47 ft.lbs. on 323 or to 41-59 ft.lbs. on 626 & MX-6.
Turning Angle
FRONT
Steering angle is adjusted by loosening tie rod locknuts and turning tie rods so that steering wheel is in straight ahead position.
