5 L4-2.3L (2007)
Air Door Actuator / Motor: Service and Repair
Air Intake Actuator
AIR INTAKE ACTUATOR REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Front scuff plate inner (RH)
2. Front side trim (RH)
3. Side wall
4. Shift lever component (MTX)
5. Selector lever component (ATX)
6. Front console
7. Side panel
8. Glove compartment
9. Car-navigation unit
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.