5 L4-2.3L (2007)
Solar Sensor: Service and Repair
SOLAR RADIATION SENSOR REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Pry the solar radiation sensor from the dashboard using a flathead screwdriver wrapped with protective tape.
4. Remove in the order indicated in the table.
CAUTION: After the solar radiation sensor removal, the sensor connector could fall in the dashboard making the installation difficult.
Therefore, hold the rooted end of the sensor connector using a clip or similar tool to prevent it from falling.
5. Install in the reverse order of removal.
