5 L4-2.3L (2007)
2. Inspect the following wiring harnesses for open or short circuit (continuity check).
Open circuit
-
If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
-
EVAP system leak detection pump terminal A and main relay terminal C
-
EVAP system leak detection pump terminal B and the body ground
-
EVAP system leak detection pump terminal C and PCM terminal 1AJ
-
EVAP system leak detection pump terminal D and PCM terminal 1AF
Short circuit
-
If there is continuity, there is a short circuit. Repair or replace the wiring harness.
-
EVAP system leak detection pump terminal A and the body ground
-
EVAP system leak detection pump terminal B and power supply
-
EVAP system leak detection pump terminal C and power supply
-
EVAP system leak detection pump terminal C and body ground
-
EVAP system leak detection pump terminal D and power supply
-
EVAP system leak detection pump terminal D and body ground
