6 L4-2.3L (2006)
Body Control Module: All Technical Service Bulletins
Body - Windows Open Unintentionally
Bulletin No.: 09-012/08
Last Issued: 04/28/2008
Subject:
WINDOWS OPEN UNINTENTIONALLY
BULLETIN NOTE:
This bulletin supersedes the previous bulletin 09-048/06 issued 11/16/06. The APPLICABLE MODEL(S)/VINs have been revised.
APPLICABLE MODEL(S)/VINs
2006-2007 Mazda6 vehicles produced before Oct. 10, 2006
2006 Mazdaspeed6 vehicles with VINs lower than JM1GG****6*108468 (produced before September 1, 2006)
2007 CX-7 vehicles with VINs lower than JM3ER****70146122 (produced before October 12, 2006)
DESCRIPTION
When returning to their vehicle after locking it with all the windows closed, the customer finds that all the windows (Mazdaspeed6) or both front
windows (Mazda6 and CX-7) are fully open. This can occur when the Remote Keyless Entry (RKE) transmitter is mishandled by the user.
The following improvements have been implemented to reduce the chance of unintentionally opening the windows.
^
Changed the specification of Global Opening/Closing (GOC) to a "double-push" type transmitter button function. The RKE transmitter now works
when the UNLOCK button is pushed twice and held until the windows open.
^
Discontinued full-auto opening mode when using GOC. Windows will now stop opening as soon as the UNLOCK button on the RKE transmitter is
released.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1.
Verify customer concern.
2.
Replace Body Control Module (BCM) according to Mazda6 Workshop Manual (section 09-40 BODY CONTROL MODULE (BCM)
REMOVAL/INSTALLATION) or CX-7 Workshop Manual (section 09-40 BODY CONTROL MODULE (BCM)
REMOVAL/INSTALLATION).
3.
Verify repair.
4.
After battery is reconnected, complete the "Power Window Initialization Procedure" to ensure windows "auto up/down" feature functions
properly.
NOTE:
Please inform the customer the RKE transmitter will now work when the UNLOCK button is pushed TWICE and held until the windows open.
POWER WINDOW INITIALIZATION PROCEDURE
1.
Turn ignition to ON position.
