mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Antenna Feeder No.1 Removal/Installation|Page 6841 > < Antenna Feeder No.1 Removal/Installation|Page 6839
Page 1
background image

Antenna Cable: Service and Repair
Antenna Feeder No.2 Removal/Installation

ANTENNA FEEDER NO.2 REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the rain sensor cover. (with auto light / wiper system)  See: Sensors and Switches/Sensors and Switches - Wiper and Washer

Systems/Rain Sensor/Service and Repair

3. Disconnect the rain sensor connector. (with auto light / wiper system)  See: Sensors and Switches/Sensors and Switches - Wiper and Washer

Systems/Rain Sensor/Service and Repair

4. Disconnect the auto-dimming mirror connector. (with auto-dimming mirror)  See: Body and Frame/Mirrors/Service and Repair/Auto-Dimming

Mirror Removal  See: Body and Frame/Mirrors/Service and Repair/Auto-Dimming Mirror Installation

5. Remove the following parts: 

a. Sunroof seaming welt (with sunroof system)

b. A-pillar trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation

c. Upper anchor of the front seat belt  See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Belt

Removal/Installation

d. Front scuff plate  See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation

e. Rear scuff plate  See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation

f.

B-pillar lower trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Lower Trim Removal/Installation

g. B-pillar upper trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Upper Trim Removal/Installation

h. Rear seat cushion  See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Removal/Installation

i.

Rear side seat back  See: Body and Frame/Seats/Service and Repair/Overhaul/Rear Side Seat Back Removal/Installation

j.

C-pillar trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/C-Pillar Trim Removal/Installation

k. Map light  See: Lighting and Horns/Map Light/Service and Repair/Map Light Removal/Installation

l.

Sunvisor  See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair

m. Assist handle  See: Body and Frame/Interior Moulding / Trim/Passenger Assist Handle/Service and Repair

n. Headliner  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair

6. Peel off the tape and remove antenna feeder No.2.

7. Install in the reverse order of removal.

Antenna Feeder No.1 Removal/Installation|Page 6841 > < Antenna Feeder No.1 Removal/Installation|Page 6839