6 L4-2.5L (2010)
Speaker: Testing and Inspection
Front Center Speaker Inspection
FRONT CENTER SPEAKER INSPECTION
1. Disconnect the negative battery cable.
2. Remove the center panel upper. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Center Panel Upper Removal/Installation
3. Remove the front center speaker. See: Service and Repair/Front Center Speaker Removal/Installation
4. Verify the resistance between the front center speaker terminals.
-
If not within the specification, replace the front center speaker.
Resistance
-
2.24-3.96 ohms