6 L4-2.5L (2010)
Front Bumper Cover / Fascia: All Technical Service Bulletins
Body - Front Bumper Fascia Appears 'Popped Out'
Bulletin No: 09-029/10
Last Issued: 06/15/2010
Subject:
FRONT FACIA POPPED OUT AT FENDER
APPLICABLE MODEL(S)/VINS
2009-2010 Mazda6 vehicles produced before April 27, 2010.
DESCRIPTION
Some vehicles may experience a concern where the front fascia appears popped out" just below the head lamp.
This may be due to a combination of a retaining issue with the clip and the installation procedure.
Customers having this concern should have their vehicle repaired using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
NOTE:
It is not necessary to remove the entire bumper during the repair.
2. Remove five (5) front splash shield retaining screws.