6 L4-2.5L (2010)
Center Mounted Brake Lamp: Service and Repair
HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Open the trunk lid.
3. Disconnect the high-mount brake light connector shown in the figure.
4. Lift up the high-mount brake light in the direction of the arrow and detach the tabs.
5. Pull the high-mount brake light in the direction of the arrow shown in the figure to detach the hooks and pin.
6. Remove the high-mount brake light.
7. Install in the reverse order of removal.