6 L4-2.5L (2010)
Evaporative Emissions Air Separator: Procedures
EVAPORATIVE CHAMBER INSPECTION [L5]
1. Remove the evaporative chamber. See: Removal and Replacement
2. Plug the port C.
3. Verify that there is air flow from port B when pressure is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Removal and Replacement
4. Remove the plug of port C.
5. Plug the port B.
6. Verify that there is air flow from port C when pressure is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Removal and Replacement
7. Remove the plug of port B.
8. Verify that there is air flow when vacuum is applied to port A.
-
If there is no airflow, replace the evaporative chamber. See: Removal and Replacement