6 L4-2.5L (2010)
Oxygen Sensor: Service and Repair
Air Fuel Ratio (A/F) Sensor Removal/Installation
AIR FUEL RATIO (A/F) SENSOR REMOVAL/INSTALLATION [L5]
WARNING:
-
A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
1. Disconnect the negative battery cable.
2. Remove the plug hole plate. See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Plug Hole Plate
Removal/Installation
3. Disconnect the A/F sensor connector.
4. Remove the A/F sensor using the SST.
5. Install in the reverse order of removal.