6 L4-2.5L (2010)
Type 2
Drivers-side touch sensor: Unlock drivers-side door only.
Drivers-side button: Locking doors only.
Passengers-side touch sensor: Unlocking all doors.
Passengers-side button: Locking doors only.
*3
Type 3
Drivers-side touch sensor: Unlocking all doors.
Drivers-side button: Locking all doors only.
Passengers-side touch sensor: Unlocking all doors.
Passengers-side button: Locking all doors only.
*4
Type 4
Drivers-side touch sensor: Disabled.
Drivers-side button: 2-stage unlocking/locking all doors.
Passengers-side touch sensor: Disabled.
Passengers-side button: Unlocking/locking all doors.
Keyless Entry Start System
-
For the keyless entry system, refer to the control system personalization features setting. See: Body and Frame/Body Control Systems/Body
Control Module/Testing and Inspection/Programming and Relearning/Control System Personalization Features Setting Procedure
Auto Door Lock System
-
The auto door lock system is controlled by the BCM.
-
The following customization settings for the auto door lock system can be performed on BCMs equipped with the auto door lock system.
CAUTION:
-
Some BCMs are not equipped with the auto door lock system depending on the vehicle's period of manufacture. BCMs which are not equipped
with the auto door lock system do not have the customization setting.
NOTE:
-
It is possible to verify whether or not a BCM is equipped with the door lock system by the part number.
-
Before performing the customization setting, verify the BCM part number and whether or not the auto door lock system is equipped.
1. Verify the BCM part number referring to the part number identification procedure for the BCM.
NOTE:
-
There are two types of procedures for the BCM part number identification, one uses the M-MDS and the other does not.
-
Both procedures can be used for verifying the BCM part number.
-
Procedure using M-MDS.
-
Procedure not using M-MDS.
2. Verify that the customization setting is enabled using the following table. Using M-MDS