6 L4-2.5L (2010)
11. Apply sealant to the area of the glass surface as shown in the figure.
12. Insert the positioning pins to the body and install the windshield.
13. Verify that the clearance between the A-pillar and the roof is within the range shown in the figure, and press along the perimeter of the glass.
14. Install the headliner.
15. Install the following parts:
a. Assist handle See: Body and Frame/Interior Moulding / Trim/Passenger Assist Handle/Service and Repair
b. Sunvisor See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair
c. A-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation
d. Rear view mirror (Vehicles without rain sensor) See: Body and Frame/Mirrors/Service and Repair/Rearview Mirror Installation
e. Auto-dimming mirror (Vehicles with rain sensor) See: Body and Frame/Mirrors/Service and Repair/Auto-Dimming Mirror Installation
f.
Rain sensor (Vehicles with rain sensor) See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Rain Sensor/Service
and Repair