6 V6-3.0L (2007)
Technical Service Bulletin # 0907609
Date: 091125
Interior - Seat Trim Replacement Procedure
Bulletin No: 09-076/09
Last Issue: 11/25/2009
Subject:
SEAT TRIM REPLACEMENT PROCEDURE
APPLICABLE MODEL(S) / VINS
2004-2010 MAZDA3
2006-2010 MAZDA5
2003-2010 MAZDA6
2007-2010 CX-7
2007-2010 CX-9
DESCRIPTION
Some vehicles may exhibit a seat trim concern such as a stain, scuff or other trim damage where seat trim replacement becomes necessary. To avoid
replacing the entire seat assembly, refer to the repair procedure to replace the seat trim.
NOTE:
For warrantable repairs, the complete seat assembly cannot be replaced when individual components are available.
Depending on the subject vehicle, some workshop manuals have a simplified procedure for seat trim replacement. In this case, refer to the repair
procedure as a supplement to the applicable workshop manual.
PART(S) INFORMATION
Repair Procedure
REPAIR PROCEDURE
WARNING:
Before beginning the following repair on vehicles equipped with front seat side airbags, be sure to follow all "Warnings" and "Cautions" in the workshop
manual (Section 08 - RESTRAINTS).
NOTE:
Although the Mazda6 is used as the example below, the procedures are basically the same for the other models.
FRONT SEAT CUSHION TRIM REMOVAL (Removal of seat assembly and side cover is necessary):