6 V6-3.0L (2007)
5. Remove the under cover.
6. Remove the oil drain plug and gasket.
7. Drain the ATF into a container.
8. Install a new gasket and the drain plug.
Tightening torque 23.5 - 54.9 N-m (2.4 - 5.5 kgf-m, 17.4 - 40.4 ft-lbf)
9. Add the specified ATF through the oil filler plug until it reaches the lower notch of dipstick.
ATF
Type: JWS3309
Capacity (Approx. quantity): 7.0 L (7.4 US qt, 6.2 Imp qt)
10. Install a new O-ring and the filler plug.
Tightening torque 23.5 - 54.9 N-m (2.4 - 5.5 kgf-m, 17.4 - 40.4 ft-lbf)
11. Install the under cover.
12. Install the air cleaner component.
13. Connect the negative battery cable.
14. Ensure that the ATF level is in the HOT range (65°C (149°F)).
^
Add ATF to the specified level as necessary.