6 V6-3.0L (2007)
Intake Air Temperature Sensor: Testing and Inspection
INTAKE AIR TEMPERATURE (EAT) SENSOR INSPECTING[AJ]
NOTE: Perform the following inspection only when directed.
Resistance Inspection
1. Disconnect the negative battery cable.
2. Disconnect the MAF/IAT sensor connector.
Specification
3. Measure the resistance between the MAF/IAT sensor terminals D and E using an ohmmeter.
-
If the IAT sensor is okay, but the PID value is out of specification, perform the "Circuit Open/ Short Inspection".
-
If not as specified, replace the MAF/IAT sensor.