6 V6-3.0L (2007)
-
If the transaxle harness is okay, perform the resistance inspection (off-vehicle inspection).
-
If there is a problem, repair or replace the transaxle harness.
Resistance Inspection (Off-Vehicle Inspection)
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the solenoid valve(s).
4. Measure the resistance of each solenoid valve individually.
^
If not as specified, replace the solenoid valve.
5. Install the solenoid valve(s).
6. Install the battery and battery tray.
7. Connect the negative battery cable.
Pressure control solenoid B
Resistance 1.0 - 4.2 ohms (ATF temperature: -40 - 150°C (-40 - 302°F))
Shift solenoid F
Resistance 8.4 - 21.8 ohms (ATF temperature: -40 - 150°C (-40 - 302°F))