6 V6-3.0L (2007)
Control Module: Testing and Inspection
[FS5A-EL]
TCM INSPECTION [FS5A-EL]
Caution: The TCM terminal voltages vary with changes in measuring and vehicle conditions. Always carry out a total inspection of the input
and output systems, and the TCM to determine the cause of trouble. Otherwise, a mis-diagnosis could occur.
1. Measure the voltage at each terminal.
^
If any incorrect voltage is detected, inspect the related system(s), wiring harnesses and connector(s) referring to the Action column in the
terminal voltage table.
Terminal Voltage Table (Reference) (Part 1)