6 V6-3.0L (2007)
Inspection
-
Pull lightly on individual wires to verify that they are secured in the terminal.
Replacement
-
Use the appropriate tools to remove a terminal as. shown. When installing a terminal, be sure to insert it until it locks securely.
-
Insert a thin piece of metal from the terminal side of the connector and with the terminal locking tab pressed down, pull the terminal out from the
connector.
Sensors, Switches, And Relays
-
Handle sensors, switches, and relays carefully. Do not drop them or strike them against other objects.
Fuse
Replacement
-
When replacing a fuse, be sure to replace it with one of the same capacity. If a fuse fails again, the circuit probably has a short and the wiring