6 V6-3.0L (2007)
17. Install the clip to the selector cable as shown in the figure.
18. Shift the selector lever to P position.
19. Turn the manual shaft lever to P position.
20. Connect the selector cable.
21. Inspect for continuity at the TR switch. (See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].) See: Powertrain
Management/Transmission Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Transaxle Range (TR) Switch
Inspection
^
If not as specified, readjust the TR switch.
22. Connect the TR switch connector.
23. Install the air cleaner component.
24. Connect the negative battery cable.
25. Inspect operation of the TR switch. (See TRANSAXLE RANGE (TR) SWITCH INSPECTION [FS5A-EL].) See: Powertrain
Management/Transmission Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Transaxle Range (TR) Switch
Inspection
^
If not as specified, readjust the TR switch.
