mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Steering - Drift/Pull Diagnostics|Page 5348 > < Steering - Drift/Pull Diagnostics|Page 5346
Page 18
background image

^

If the offset is 30 or less, it is considered normal.

^

If the offset is more than 30, adjust the steering wheel center using "Adjustment of Steering Wheel Center."

^

If the steering is pulling to the right or the left, this procedure does not apply. Refer to MS3 online instructions for troubleshooting.

3. Verify repair.

Measurement of Steering Wheel Offset

1. Visually align the steering wheel to its center, then apply tape on the steering wheel and the steering column cover.

2. Put an alignment mark on the tape.

3. Drive the vehicle and align the steering wheel to its driving center, then put another mark on the tape.

Steering - Drift/Pull Diagnostics|Page 5348 > < Steering - Drift/Pull Diagnostics|Page 5346