6 V6-3.0L (2007)
6. Loosen the TR switch mounting bolts.
7. Measure the resistance between the terminals B and C.
8. Adjust the switch to the point as follow.
Resistance standard value 750 ohms
9. Tighten the TR switch mounting bolts.
Tightening torque 8 - 11 N-m (82 - 112 kgf-cm, 71 - 97 in-lbf)
10. Move the selector lever to N position.
11. Verify that the TR switch is aligned with N position.
12. Connect the TR switch connector.
13. Install the clip to the selector cable as shown in the figure.