6 V6-3.0L (2007)
Gear Sensor/Switch: Service and Repair
[A65M-R]
NEUTRAL SWITCH REMOVAL/INSTALLATION [A65M-R]
1. Remove the neutral switch.
2. Apply a light coat of silicone sealant to the screw of the neutral switch.
Sealant Three Bond product: TB1215
3. Install the neutral switch to the transaxle case.
Tightening torque 22.5 - 33.3 N-m (2.3 - 3.4 kgf-m, 16.6 - 24.6 ft-lbf)
