6 V6-3.0L (2007)
15. Install a new O-ring to the coupler component.
Caution:
^
Do not apply too much force to the coupler component.
^
Do not damage the coupler component.
16. Install the coupler component to the transaxle case.
17. Install a new coupler component lock plate.
18. Install the control valve body.
19. Apply ATF to a new O-ring and install it on the oil pipe.
20. Install the oil pipe and oil hose.
21. Add ATF to the specified level.
22. Install the splash shield. (front LH)
23. Install the mudguard. (front LH)
24. Install the under cover.
25. Install the TCM.
26. Install the air cleaner component and air cleaner bracket.
27. Connect the negative battery cable.
28. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL].) See: Transmission Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Mechanical System Test
