6 V6-3.0L DOHC (2003)
When a retail vehicle is brought into the dealer for any type of repair or scheduled maintenance, inspect and repair the vehicle according to the
procedures contained in this service bulletin.
VEHICLE INSPECTION PROCEDURE
1.
Verify the vehicle is within one of the following VIN and production ranges:
2003 - 2004 Mazda6 3.0L vehicles built from May 16, 2002 through August 23, 2004
2003 - 2005 Mazda6, 2.3L - Non-PZEV (Non-Partial Zero Emission Vehicle) vehicles built from May 20, 2002 through July 2, 2005
VIN Range:
^
2.3L Engines
^
1YV FP**C* 35 M00003 -) M56997
^
1YV HP**C* 35 M00030 -) M54604
^
1YV FP**C* 45 N00001 -) N99310
^
1YV HP**C* 45 N00004 -) N99307
^
1YV FP**C* 55 M00014 -) M76942
^
1YV HP**C* 55 M00024 -) M77535
^
3.0L Engines
^
1YV FP**D* 35 M00227 -) M57077
^
1YV HP**D* 35 M00005 -) M55980
^
1YV FP**D* 45 N04304 -) N99312
^
1YV HP**D* 45 N00002 -) N99286
^
If the vehicle is within one of the above VIN and production ranges, proceed to Step 2.
^
If the vehicle is not within one of the above VIN and production ranges, return the vehicle to the customer or inventory.
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect the vehicle for a Campaign Label MSP10 attached to the vehicle's
bulkhead. Refer to eMDCS System - Warranty Vehicle Inquiry Results table below.
NOTE:
Verify the campaign number as the vehicle may have multiple labels.