6 V6-3.7L (2009)
Control Assembly: Service and Repair
Climate Control Unit Removal/Installation [Full-Auto Air Conditioner]
CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Upper panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Upper Panel
Removal/Installation
b. Decoration panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Decoration Panel Removal/Installation
c. Shift lever knob (MTX) See: Transmission and Drivetrain/Manual Transmission/Transaxle/Shifter M/T/Locations
d. Shift panel See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Shift Panel
Removal/Installation
e. Center panel lower See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Center Panel Lower Removal/Installation
3. Remove in the order indicated in the table.
4. Disconnect the climate control unit connectors and remove the climate control unit.
5. Install in the reverse order of removal.
