6 V6-3.7L (2009)
Keyless Entry Module: Service and Repair
Keyless Beeper Removal/Installation [Advanced Keyless Entry And Push Button Start System]
KEYLESS BEEPER REMOVAL/INSTALLATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
1. Disconnect the negative battery cable.
2. Slightly bend back the front mudguard. See: Body and Frame/Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair
3. Disconnect the connector.
4. Remove the blot.
5. Press the keyless beeper tab aside using a tape-wrapped flathead screwdriver.
6. Remove the keyless beeper from the bracket.
7. Install in the reverse order of removal.