6 V6-3.7L (2009)
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect the vehicle for a Campaign Label MSP18 attached to the vehicle's
hood. Refer to eMDCS System - Warranty Vehicle Inquiry Results table above.
NOTE:
Verify the campaign number as the vehicle may have multiple labels.
WARRANTY INFORMATION
Inspection Procedure/Repair Procedure
INSPECTION PROCEDURE
1.
Turn engine OFF.
NOTE:
Always use a fender cover and make sure to cover or remove all watches, rings & belt buckles to avoid damaging the paint during inspection.
2.
Record customer's pre-set radio stations.
3.
Disconnect negative battery cable.
4.
Remove EJB cover.
5.
Identify HVAC blower motor relay located under left front fender flange.