mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sensors and Switches > < Auto Light/Wiper Control Module Removal/Installation - Lighting Systems
Page 1
background image

Wiper Control Module: Service and Repair
Auto Light/Wiper Control Module Removal/Installation - Washer System

AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION

NOTE:

-

Auto wiper system are integrated with the auto light/wiper control module.

1. Disconnect the negative battery cable.

2. Remove the dashboard under cover (Driver side).  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Dashboard Under Cover Removal/Installation

3. Remove the auto light/wiper control module.  See: Relays and Modules - Lighting and Horns/Headlamp Control Module/Service and Repair/Auto

Light-Off Control Module Removal/Installation

4. Install in the reverse order of removal.

Sensors and Switches > < Auto Light/Wiper Control Module Removal/Installation - Lighting Systems