6 V6-3.7L (2009)
Steering Column Lock: Component Tests and General Diagnostics
STEERING LOCK UNIT INSPECTION [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
1. Remove the column cover. See: Steering Column Cover/Service and Repair
2. Measure each terminal voltage under the measurement condition.
-
If the voltage is not as specified in the terminal voltage table, inspect the parts under "Inspection item(s)".
-
If the system does not work normally even though the inspection items are normal, replace the steering lock unit.
Terminal Voltage Table (Reference)
Terminal Voltage Table (Reference)