6 V6-3.7L (2009)
Gear Sensor/Switch: Service and Repair
NEUTRAL SWITCH REMOVAL/INSTALLATION [G66M-R]
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
3. Remove the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
4. Drain the oil from the transaxle.
5. Remove the neutral switch.
6. Install the neutral switch (with a new packing) to the transaxle case.
Tightening torque
-
20-29 Nm {2.0-2.9 kgf-m, 15-21 ft-lbf}
7. Install the battery and battery tray. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
8. Add the specified amount and type of oil.
9. Install the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation