626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
11.
Tighten the two mounting screws.
NOTE:
Since the seaing of the sensor is extremely sensitive and easy to move while tightening the screws, be careful not to move the throttle sensor from the set
position when tightening the screws.
12.
Again, confirm the setting of the throttle sensor according to Step 7 and 9.
Feeler Gauge
Checker
0.40 mm
Buzzing
(0.016 in.)
(continuity)
0.55 mm
No Buzzing
(0.022 in.) (
no continuity)
If setting is incorrect, repeat Step 7 through 11.
13.
Disconnect the checker from the throttle sensor.
Attachment II
14.
Connect the throttle sensor coupler to the replaced throttle sensor.