626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
Checking The Stop Screw
6.
Replace the thickness gauge with the 0.55 mm (0.022 in.) thickness gauge and check that the buzzer does not sound.
7.
If the buzzer sounds, repeat Steps 2 through 6.
Tightening The Attaching Screws
8.
Tighten the two attaching screws.
NOTE:
Be careful not to disturb the throttle sensor position when tightening the screw.
Throttle Sensor Tester Connection
9.
Open the throttle valve fully a few times, then recheck the adjustment of the throttle sensor.
10.
Disconnect the tester from the throttle sensor and reconnect the connector.
