626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
Fig. 6 Inserting Thickness Gauge, Throttle Sensor
TESTING TERMINAL RESISTANCE
7.
Check throttle sensor setting, if necessary, as follows:
a. Disconnect connector from sensor.
b. Install a .016 inch thick gauge between lever and throttle adjusting screw Fig. 6.
Fig. 8 Checking Throttle Sensor Terminal Resistance
c. Using ohmmeter, Fig. 8, check for continuity between terminals B and D.
d. Replace thickness gauge with one of .022 inch.
e. Check for no continuity between terminals B and D.
