626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
Suspension Strut / Shock Absorber: Customer Interest
Strut, Front - Squeaking or Groaning Noise
Category Applicable Model/s
Subject
Bulletin No. 012/87
13
1986-1987 626
NOISE FROM FRONT STRUT
Issued
12/28/87
Revised
DESCRIPTION
The thrust bearing on the front strut has been modified to prevent a squeaking or groaning noise and to improve maneuverability.
If you encounter such a customer complaint, you are requested to install the new plastic spacer bearings on both struts.
AFFECTED VEHICLES
All 1986 and 1987 626.
REPAIR PROCEDURE
1.
Disassemble the front strut as shown below in accordance with the procedure described in the workshop manual.
2.
Discard the original washer, seal and thrust bearing.
3.
Reassemble the front strut with the new plastic spacer bearing.
NOTE:
Be sure not to apply any lubricant on the plastic spacer bearing.
PARTS INFORMATION
NOTE:
