626 L4-1998 cc 2.0L SOHC Turbo FE (1986)
Wheel Hub: Technical Service Bulletins
Tools - Wheel Hub Puller
Category 40
011/86
4/29/86
626, 323, GLC (FWD Only)
SUBJECT
Wheel Hub Puller
DESCRIPTION
The Anchor Bolt of the Wheel Hub Puller has been strenghtened in order to improve the durability. A part number for the Anchor Bolt has been
established and is now available as a service part.
NOTE:
An allowable removal torque of 108 N-m (80 ft.lb.) has been established for the removal of the Front Wheel Bearing.
If the Front Wheel Bearing cannot be removed within the allowable removal torque of 108 N-m (80 ft.lb.), replace the Steering Knuckle
Assembly. Excessive removal torque may damage the knuckle. ALLOWABLE TIGHTENING TORQUE 108 N-m (80 ft.lb.)
PARTS INFORMATION
PART NUMBER DESCRIPTION
49 G033 103
Anchor Bolt
49 G030 725
Wheel Hub Puller